Portable balancer & Vibration analyzer Balanset-1A
Description:
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Get a €100 discount on the official website vibromera.eu with promo code VB100
Balanset-1A Device Description
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Core Features and Capabilities
Vibrometer Mode
Tachometer: Precise RPM measurement.
Phase: Measures the phase angle of vibration signals for detailed analysis.
1x Vibration: Measurement and analysis of the dominant frequency component.
FFT Spectrum: Thorough analysis of the vibration signal's frequency spectrum.
Overall Vibration: Monitoring the total vibration level.
Measurement Log: Saves data for later analysis.
Rotor Balancing Mode
Single-Plane Balancing: Corrects rotors in one plane to decrease vibration.
Two-Plane Balancing: Dynamic rotor balancing in two planes.
Polar Diagram: Visualizes imbalance on a polar chart for precise placement of corrective weights.
Last Session Recovery: Provides the option to resume the last balancing session.
Tolerance Calculator (ISO 1940): Calculates allowable imbalance according to ISO 1940 standards.
Grinding Wheel Balancing: Corrects grinding wheel imbalance with three counterweights.
Charts and Diagrams
Overall Graphs: Visualizes total vibration levels.
1x Graphs: Shows the primary frequency vibration characteristics.
Harmonic Graphs: Shows the influence of harmonic frequencies.
Spectral Graphs: Displays the frequency spectrum for detailed analysis.
Additional Functions
Archive: Store and access previous balancing sessions.
Reports: Produce detailed reports on balancing results.
Rebalancing: Facilitates rebalancing with previously saved data.
Serial Production Balancing: Suitable for balancing rotors during serial production.
What’s in the Package
The Balanset-1A package includes:
A measurement block with USB interface.
A pair of vibration sensors.
Optical sensor (laser tachometer) with magnetic mount.
Electronic balance scales.
Software (Note: Laptop not included, available as an additional order).
Plastic carrying case.
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Description:
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Get a €100 discount on the official website vibromera.eu with promo code VB100
Balanset-1A Device Description
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Core Features and Capabilities
Vibrometer Mode
Tachometer: Precise RPM measurement.
Phase: Measures the phase angle of vibration signals for detailed analysis.
1x Vibration: Measurement and analysis of the dominant frequency component.
FFT Spectrum: Thorough analysis of the vibration signal's frequency spectrum.
Overall Vibration: Monitoring the total vibration level.
Measurement Log: Saves data for later analysis.
Rotor Balancing Mode
Single-Plane Balancing: Corrects rotors in one plane to decrease vibration.
Two-Plane Balancing: Dynamic rotor balancing in two planes.
Polar Diagram: Visualizes imbalance on a polar chart for precise placement of corrective weights.
Last Session Recovery: Provides the option to resume the last balancing session.
Tolerance Calculator (ISO 1940): Calculates allowable imbalance according to ISO 1940 standards.
Grinding Wheel Balancing: Corrects grinding wheel imbalance with three counterweights.
Charts and Diagrams
Overall Graphs: Visualizes total vibration levels.
1x Graphs: Shows the primary frequency vibration characteristics.
Harmonic Graphs: Shows the influence of harmonic frequencies.
Spectral Graphs: Displays the frequency spectrum for detailed analysis.
Additional Functions
Archive: Store and access previous balancing sessions.
Reports: Produce detailed reports on balancing results.
Rebalancing: Facilitates rebalancing with previously saved data.
Serial Production Balancing: Suitable for balancing rotors during serial production.
What’s in the Package
The Balanset-1A package includes:
A measurement block with USB interface.
A pair of vibration sensors.
Optical sensor (laser tachometer) with magnetic mount.
Electronic balance scales.
Software (Note: Laptop not included, available as an additional order).
Plastic carrying case.
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Save €100 on vibromera.eu with promo code VB100!